Auto Parts For Do-It-Yourself Jobs

With the sky-high prices of professional car repair, do-it-yourself (DIY) car maintenance is perhaps the only practical solution. After all, a big chunk of what professional auto centers charge is a service fee to pay for the labor of the technicians and mechanics. If you're fine with the idea of getting down and dirty with your car, doing the repairs and the maintenance yourself is a much cheaper alternative. There are several routine auto maintenance procedures that don't really need a lot of technical know-how to do; just an auto part, the right tools, and about an hour of your time will suffice. Here are a few such procedures:

Replacing Your Own Filters

Replacing old and worn fuel or oil filters is one of the more common items on any car maintenance checklist. It's a little pricey to have to go to the auto shop for this replacement, though, because the auto shop's labor charge often exceeds the cost of the part itself! Because you have to replace your filters every 3,000 miles or so, those charges for labor can really add up. DIY filter replacement, as you could probably imagine, can and will save you quite a bit of money.

To replace your own filters, all you'll need to get is the filter itself. This will cost you as little as $5 for the oil filter or $15 for the fuel filter. When getting replacement filters, make sure to get the one that's specifically for your car's make and model because the specifications vary. The filters come with handy replacement instructions, so no rocket science here!

Bring In New Brakes

Changing your car's brakes is another common car care procedure. Because it's so common, auto shops tend to charge a lot on brake replacement services as well. Just like the filter replacement, it's something you have to do regularly - every 12,000 miles - so doing it yourself can save you a lot of money in the long run.

The auto shops can charge as much as $200 to change your brakes when you can buy the parts yourself for as low as a measly $35. Yes, they charge that much. They also tend to use or recommend more expensive or higher-end parts because they make better profit margins on them.

Although you're most likely going to change just the brakes in front, you'll be buying a boxed set of brake items. That set should include the brake pads themselves, a set of secondary parts and, oftentimes, some lubricating powder. Aside from the set of parts itself, you're going to need some basic tools like wrenches, which you're likely to find in your garage or toolbox.

Changing the brakes and replacing the filters aren't the only things you'll have to do regularly to maintain your car. There are also things like oil changes, hose changes, belt replacements, and so on. Having all of those maintenance procedures done at the auto shop will end up costing you a lot in labor. Why pay all that extra money when you can do it yourself?

 

Replacement Filter Supplier Thinks Outside the Box with 5" Return Air Filters

Rochester, IN (PRWEB) January 7, 2009 -- Online replacement air filter supplier, FilterHut.com, has announced the launch of 5" return air grille filters designed to fit in place of the standard...

Crash-ferry oil blunder

Maybe the city's bonehead boat engineers should have checked with Jiffy Lube. A replacement oil filter might have prevented the Staten Island Ferry crash in May that injured 48 people and caused millions of dollars in damage, the Coast Guard says. The filter problem was discussed in a Coast...

Replacement Gasket works with quick-release dust cups.

Not prone to wear and tear, P618619 snaps onto quick-release dust cups to replace sponge gasket that deteriorates and may become dislodged in service. Product withstood in-situ testing on drill rig at open cut coal mine, where it was subject to 1,500 hr of service and countless opening and closing of trapdoor. It did not exhibit any shrinkage and maintained durometer (hardness) and position ...

Google Earnings Call: What You Need to Know

A look at the search titan's second quarter.

Water, sewer authorities to proceed with bridge replacement involvement

Tamaqua officials elected to allow the borough's water and sewer authorities to proceed with the next steps of their involvement with the Rt. 309/Center Street bridge replacement that is slated to begin next spring.